SUPA Heater

£795.00

Introducing the Supa Heater.

Heat your hot tub faster, and for less. The Supa heater is revolutionary product where heating spa water is fast and only cost £2.50 for a full hot tub.

* Installation costs and gas connection kit is not included.

The Supa heater:
Heats 90% faster than a typical electric hot tub
• Heats a 1000 litre hot tub for less than £2.50!
• Offers 31KW of energy – will always heat fast, any time of year!
How does it work?
Essentially the Supa Heater is a specially developed, compact, mobile boiler and circulation pump. All you need is a plug socket and readily available propane gas.* It offers 2 distinct ways of heating.
• Connect your hose directly and set your temperature. Instantly fill your empty hot tub with water up to 40 degrees!
• Heat your existing cold water by placing Supa’s two hoses in the spa: the water will be circulated through Supa and heat from 20-40 degrees, in around 45 minutes!
*Gas, regulator and gas hose not provided.
Other advantages:
High quality; built to premium standards with a 24-month warranty
• Quiet: Supa creates little noise
• Mobile: use the same Supa Heater for multiple hot tubs
• Reduce your energy costs by 70% or more
• Save over 50% of CO2 emissions
It’s getting cold outside – how do I winter-proof my SUPA?
During colder times of the year, after you have used SUPA, it is very important to remember to remove the water from inside the heater. You can do this by leaving the cold and hot hoses out of the water and switching on the pump for 5-10 seconds until no water is coming out of the red hose.
After this, tilt SUPA sideways left and right when viewed from the front for 10-15 seconds, so any remaining water flows out of the hoses.
Remember to use the cover to protect your SUPA from the elements and store in a warm dry place where it cannot freeze.
Note: The freezing of any water in the internal pipes could cause major damage to your SUPA which is not covered by your warranty so please take care during this process.
PLEASE NOTE – THIS IS NOT AVAILABLE FOR NEXT DAY DELIVERY. THIS COMES DIRECT FROM THE MANUFACTURER.

Assembled dimensions:
117 high x 48 wide x 41 deep (cm), gross weight, 27.6 kg
What’s in the Box?
• SUPA heater – rated 31KW, intuitive digital control panel, UKCA and CE safety certified, 92% efficient
• Powder coated stand with all terrain wheels – easy to assemble
• Multi mode shower head with on/off function
• Chrome coated cowl
• x1 five-setting shower head with start/stop function
• Hard wearing TPU cover
• Self-priming diaphragm pump, rated 18.9 litres per minute
• Built-in, quick-fit stainless steel debris filter
• x2 high pressure/temperature silicone inlet hoses
• x1 high pressure/temperature silicone outlet hose
• x4 brass fast-fitting female connectors
• x3 brass fast-fitting male connectors
• x1 brass outlet fitting
• x1 gas inlet fitting
• x7 stainless steel hose clamps
• x10 clamp end protectors
• x1 27 mm propane gas regulator, EN 16129 approved, outlet pressure 37mbar, max flow 1.5kg/h
• x4 Mykalor stainless steel hose clips
• x1 3.2 m long (approx.) high-pressure, 8mm gas hose to BS3212/2
• x1 Quick connector

Warranty: 2 Years

What are you looking for?

Energy Calculator Information

The costs indicated on the Energy Calculator are calculated based on the industry’s only certified test procedure for determining energy costs. Actual owner monthly costs will vary on a wide variety of circumstances.

Values have been calculated based on standard test procedure for Portable Electric Spas as stipulated in ANSI/APSP/ICC-14 2014

  • Energy Cost based on 28.60 pence/kwh.
  • Tested at 15 °C (60°F) ambient temperature.
  • 38 °C (102°F) water temperature.
  • Master Spas cover used and not opened during testing.
  • Pumps came on during automatic cycles only for heating and filtering. They were not turned on manually.
  • Test conducted in a 3rd party approved environmental chamber certified to the ANSI/APSP/ICC-14 2014 standard.

Actual Monthly Cost of Running a hot tub or swim spa in a customer’s backyard will vary from these totals and is totally dependent upon:

  • Local energy cost.
  • Local ambient temperature.
  • Set water temperature.
  • Use of hot tub or swim spa.
  • Type and condition of cover.
  • Filter cycle settings.